- View Cart
- Hardware & Software
- » Cloud
- » Multi-Screen Module
- » SDI / NDI Module
- » Master Control Module
- » Edge Blending Module
- » Alpha Keyer Module
- » MIDI Module
- » Communications Module
- » ProPresenter Remote
- » ProPresenter Stage Display
- » Bibles
- ProVideoPlayer (PVP)
- ProVideoServer (PVS)
- Kids Media
How do I get my output to show on my screens?
Posted by Renewed Vision Support on March 26, 2011 at 11:21 AM
Updated by Renewed Vision Support on Feb 1, 2017
Getting your output/outputs to show up on your screens is a fairly simple task, but there are a few steps to it, and skipping any of the steps may result in the output not working. Lets take a look at the steps needed to get your output up and running.
The recommended steps are in text format below, but if you prefer to watch a video of the steps then click one of the links below
Step 1: Setting up your system preferences.
First let's make sure that our system preferences are correct.
On a Mac, click on the Apple on the top left of the screen, then come down to System Preferences, and cick on the Display option. We want to make sure that the computer sees your external screen(s), so look for a tab near the top of the window that is called "Arrangements". If you only see two tabs (Display and Color) then your computer cannot see another screen; make sure that the screen/projector is turned on and is plugged in, and that any drivers are installed. If you do see the Arrangements tab, great! Click on it, then look in the lower left of the window for the option to "Mirror Displays". We want to turn this OFF! So make sure it is unchecked.
On a PC, right click on the desktop and choose Desktop Properties or Screen Resolution. Depending on your version of Windows this might look different, but we want to see two monitors at the top of the screen, and make sure that the screens are set to "Extend", not "Mirror".
Step 2: Setting up your ProPresenter preferences.
Now that our screens are correct, let's get the preferences right in ProPresenter. Open ProPresenter, then go into the Preferences and click on the Display tab.
You should see several boxes in the middle of the screen. The box with the white bar across the top represents your main monitor. We want to make sure that your ProPresenter output is NOT set to your monitor, so if the box with the white bar across the top is filled with black and it says Output in it, simply drag the Output to the other box. (Note: If your Output is stuck and won't drag over, restart ProPresenter and try again.) Here is an example:
If you will not be using the Stage Display, then you can ignore the purple "SD" box. If, however, you will be using the Stage Display, then you will need to set that up on another external screen, like this:
Take a look around the rest of this window, there are some important preferences in here that you may want to explore. After that, we move on to...
Step 3: Restart ProPresenter
At this point we want to restart ProPresenter. This will make sure that the screens are aligned correctly.
Step 4: Turn on the output
The last step is to turn on your output (if it isn't set to do that automatically). Usually you can look in the top right of the main ProPresenter window for a blue circle that is labeled as Output. Just click on this button to turn on or off your output. You can also use the shortcut keys:
Command-1 (Control-1 on Windows): Toggle the ProPresenter output
Command-2 (Control-2 on Windows): Toggle the Stage Display
That's it! You are set and ready to go!
Step 5: A Bug Fix
For some people on a Mac the above steps do not fix the problem. Specifically, after they go through these steps, they still see the output on the main screen (usually covering only one corner of the screen). Almost always this is due to a bug in the operaing system and it is super easy to fix. Click on the Apple in the top left and come down to System Preferences. (If your Display tab is still open from earlier, click on the "Show All" button on the top; it looks like a bunch of small dots.)
Now click on Mission Control on the top row and look for the check box next to "Displays have Separate Spaces". We want this check box to be OFF! Just uncheck it, then restart the computer (this is needed for it to actually apply the change). In the vast majority of cases this will fix your issue. If not, please contact support.
Keywords: output, displays, screens