Support Center

RSS Feed
Knowledge Base : ProPresenter Modules
 

Both the digital and analog versions of the Matrox Dual/TripleHead2Go require a software installation. All drivers can be found here [http://www.matrox.com/graphics/en/support/drivers/]. The analog ve...
Before you can configure the Alpha Keyer Module, you need to register the module on your Mac. Alpha Keyer module codes are 25-digits long and start with ALP. If you have purchasd the module but not ac...
The Edge Blending Module requires a Matrox DualHead2Go or TripleHead2Go to work. You can find instructions for setting up these devices here [http://support.renewedvision.com/index.php?/Knowledgebase/...
Below are some installation instructions and settings to help you get ProPresenter modules installed and configured properly. REDEEM ACTIVATION CODE Each ProPresenter Module is required to be keye...
Before you can configure the SDI Module, you need to register the module on your Mac. SDI Module codes are 25-digits long and start with SDI. The SDI Module is also available if you purchased the Adva...
The Master Control Module allows one ProPresenter computer to remotely trigger slides and Video/Image Bin contents of one or more networked ProPresenter Slave computers. Each Slave computer can have i...
Modules are registered and linked to a specific computer. This means that you can't just move a module from one computer to another. If you need to make a permanent module transfer from one computer t...
> Macs with Mini DisplayPort or Thunderbolt connections only support > Matrox Digitial SE or DP Edition hardware. Matrox Analog or Digital > Edition devices will not work with DisplayPort or Thunderbo...
ProPresenter 6 makes it much easier to activate modules after you have purchased them. You can also easily move a module from one computer to another with just a few clicks. Once you have purchased ...
To read the full product description of the Alpha Keyer Module, please visit our ProPresenter 6 product page [https://renewedvision.com/propresenter/modules/#alpha-keyer]. This article assumes you hav...
To read the full product description of the SDI Module, please visit our ProPresenter 6 product page [https://renewedvision.com/propresenter/modules/#sdi-ndi]. This article assumes you have the correc...
The Edge Blending module does not allow you to specify which outputs of the TripleHead2Go are used for the blend. You can use just two outputs of the TH2G (left and right), but the center output wou...
ProPresenter 6 for Windows now includes support for Blackmagic hardware. This means that you can now get high-quality, reliable video inputs and outputs. The Live Video feature has lagged behind on Wi...